Call Features
Changing the DND Settings
See "Using Do-Not-Disturb (DND)" on
To turn on DND using Remote Programming:
1. Do one of the following:
2. Dial 359.
3. Enter your extension number.
4. Enter your station passcode followed by #. See
5. Dial 370.
6. Enter the DND message number (01 to 20), and then enter the second-line message
To turn off DND using Remote Programming:
Changing the Manual Call Forwarding Settings
See "Manual Call Forwarding" on
To turn on Manual Call Forwarding using Remote Programming:
1. Do one of the following:
2. Dial 359.
3. Enter your extension number.
4. Enter your station passcode followed by #. See
5. Dial one of the following Call Forwarding feature codes:
6. Do one of the following to specify a forwarding number:
To turn off Call Forwarding using Remote Programming:
Page 50
Call your DISA number (provided by your system administrator). If necessary, enter
your DISA security code.
Use any phone on the system.
station passcode for your extension.
text (if applicable).
Follow steps
1
-
4
above, dial 371, and then hang up.
Call your DISA number (provided by your system administrator). If necessary, enter
your DISA security code.
Use any phone on the system.
station passcode for your extension.
355 (All)
356 (No answer)
357 (Busy)
358 (No Answer/Busy)
Enter an extension number.
Dial the Outgoing Call access code (8 is the default code), and then dial the
number.
Follow steps
1
-
4
above, dial 355, and then hang up.
page 55
for more information about using DND.
page 45
page 33
for more information about Manual Call Forwarding.
page 45
Mitel
®
5304 IP Phone User Guide – Issue 3, February 2011
for details on setting up a
for details on setting up a