Using Account Codes
Account codes record information for phone record reports. You may be required to enter
account codes when placing calls.
There are three types of account codes:
Contact your system administrator for more information about using account codes.
To enter an optional account code:
1. Lift the handset.
2. Press the Special button and dial 390.
3. Dial the optional account code, and then press #.
To set an account code for all calls placed from your phone:
1. Lift the handset and dial 391.
2. Dial the account code.
3. Press # to save the setting. This code is used for all calls made from your phone until it
To disable the code:
1. Lift the handset and dial 391.
2. Press #. ACCOUNT CODE CLEARED appears.
Mitel
®
5304 IP Phone User Guide – Issue 3, February 2011
Standard account codes: Automatically entered into the phone record report whenever
you place a call.
Forced account codes: Entered before you can place an outside call.
Optional account codes: Entered at any time during a call.
is disabled.
Answering and Placing Calls
Page 27