Denwa Communications Mitel 5304 User Manual page 40

Assigning Speed-Dial Numbers to Programmable Buttons
You can assign Station or System Speed-Dial numbers to your programmable buttons.
NOTE
To program a Station Speed-Dial button:
1. Lift the handset, and dial 397.
2. Press the button that you want to program. If the button is:
3. Dial 382.
4. Do one of the following:
To program a System Speed-Dial button:
1. Lift the handset, and dial 397.
2. Press the button that you want to program. If the button is:
3. Dial 381.
4. Do one of the following:
Mitel ® 5304 IP Phone User Guide – Issue 3, February 2011
Before or after assigning the speed-dial number to a programmable button, make
sure the speed-dial number has either a Station Speed Dial bin or System Speed
Dial location assigned to it. For System Speed Dial numbers, numbers are pre-
assigned to the System Speed Dial locations (000 to 999 or 0000 to 4999) by your
system administrator. Therefore, you just need to choose a System Speed Dial
location that you want to use (see "Using System Speed Dial" on
details). For Station Speed Dial numbers, you must manually store numbers in the
Station Speed Dial bins (0 to 9). See "Storing Station Speed-Dial Numbers" on
page 23.

not programmed, UNDEFINED KEY appears.

programmed, the feature or extension programmed for the button appears.

not programmable, NON-PROGRAMMABLE KEY appears.

Press (Up) or (Down) to scroll through the speed-dial bin.

Enter the speed-dial bin (0 to 9).

not programmed, UNDEFINED KEY appears.

programmed, the feature or extension programmed for the button appears.

not programmable, NON-PROGRAMMABLE KEY appears.

Press (Up) or (Down) to scroll through the speed-dial location.

Enter the speed-dial location (000 to 999 or 0000 to 4999).
Answering and Placing Calls
page 23 for
Page 25