Taking Image; Taking Snapshot - Tamron 300QV-P-CM Instruction Manual

Taking Image

Taking Image

Taking Snapshot

Save a distortion compensation or an original image as an image file.
1. Click [Basic] to show the [Basic] page.
2. Select [Compensation] or [Original] in [Video change].
3. Click [Snap-shot].
4. Specify where to save the snapshot.
The image file is saved.
Note:
• Specify where to save the snapshot for the first time only. After the second
time or later, click [Snap-shot] to save an image file in a specified place. The
file is by default saved in C:\Tamron.
• The file will not be saved in Vista or Windows 7 if the IE protected mode is ON.
Turn OFF the IE protected mode.
In the [Tools] menu of IE, click [Internet Options], [Security], and [Internet Op-
tions], and uncheck the [Enable Protected Mode] box.
• The file is saved is JPEG.
• The file name indicates the IP address of the camera and the date of saving.
For example, if the IP address is 19.168.1.3 and a file is saved on September
8, 01 at 10:36:45:760, the file name is "19_168_1_3_01098-103645-
760.jpg".
30