Specifying Ip Address Of Camera - Tamron 300QV-P-CM Instruction Manual

Specifying IP address of camera

If the IP address of the camera is unknown or if the settings have been
changed, check the IP address of the camera using IPAddressAccess.
1. Insert the supplied CD-ROM into the CD-ROM drive of your PC.
2. Copy "Installer_Ver*.**_*******.exe" from the CD-ROM to any fold-
er on your PC.
* Do not copy "Installer_Ver*.**_*******.exe" to the desktop, or otherwise the file
may not work properly, depending on the authority of the PC. Be sure to copy
the file to a folder.
3. Double-click "Installer_Ver*.**_*******.exe", which you have cop-
ied onto your PC.
IPAddressAccess starts and the cameras on the network that are connected to
the PC are listed.
Note:
Depending on the PC environment, the warning message "It does not support
this PC in IPv6." may appear. Click [OK] to start IPAddressAccess.
* If you double-click a list item, you can gain access to the corresponding
webpage.
Before Getting Started
3