Tamron 300QV-P-CM Instruction Manual page 43

2. Select a screen to set the codec in [Encoding setting].
• Stream Selection
Item
Stream Selection
Note:
In the Web browser, two streams (output image 1 (original image) and output 
(compensation image)) are always output simultaneously.
3. Specify a suitable value for each item of [Image output setting].
• Common Settings
Item
Default profile
Output image
Frame size
Frame rate
Compression
Set a stream limit to connect to other companies' VMS
and NVR units.
With ON selected, 1-stream settings (output settings
for output image 1 (original image)) are selected. With
OFF selected, -stream settings (simultaneous output
settings for output image 1 (original image) and output 
(compensation image)).
Specify an image to be output from the camera.
Turn ON the check box.
With ON selected, one each can be selected from output image
1 (original image) and output image  (compensation image).
Note:
No split images can be set for a default profile.
The name of output image is shown.
Set VGA/QVGA as the image size.
Note:
The size of original image is fixed to 4VGA (QuadVGA).A
split image is selected according to [Split] settings in [Mode].
Specify the update frequency of motion picture (1 to 15).
The compression method used for the output image is shown.
• H.64
• MPEG4
• Motion JPEG (MJPEG)
Note:
The original image is compressed in Motion JPEG
(MJPEG) or MPEG4 format and split images are com-
pressed in Motion JPEG (MJPEG).
Setting up Image
Details
Details
43