Setting up Connection Admission
Specify the connection authorization to the camera.
1. Click [System] to show the [System] page.
2. Specify whether to admit the connection to camera and the ad-
mitted IP address of your PC in [access restriction] and click
[set].
Setting up Time
Set the time in the camera.
1. Click [System] to show the [System] page.
2. Specify [auto] or [manual] in [Time setting].
Specify a suitable value for each item if [manual] is set.
Item
Time zone
Daylight saving
SNTP/NTP
Time
3. Click [set].
Specify a time zone.
Enable or disable daylight saving settings.
Specify the IP address of NTP server.
Set the date, month, year, hours, minutes, and
seconds.
Specify the time of your PC in the camera by check-
ing [The present time of PC is used].
Setting up Camera
Details
51