Tamron 300QV-P-CM Instruction Manual page 35

2. Specify a suitable value for each item.
Item
Preset area
Preset sequence
Dwell time
Speed
3. Select the number of preset sequence to be executed and click
[Start].
The displayed button changes to [Stop] and the display area is switched ac-
cording to the settings.
4. Click [Stop] to stop the preset sequence.
The display before the start appears again after the preset sequence stops.
The displayed button changes to [Start].
Select one from 1 to 9, move the white area frame by
PTZ, and click [Fix] to set the display area.
Note:
You can set a title with characters up to 19 bytes in the
preset area. Input the characters in character codes.
Specify the order in which preset areas are displayed.
Note:
A maximum of four preset areas can be set per preset
sequence.
Set the display time (0 to 9 seconds) of preset areas.
Set the transfer speed (level 1 to 9) to the next preset
area.
*A higher level results in a higher speed.
Setting up Image
Details
35