Tamron 300QV-P-CM Instruction Manual page 24

Before Getting Started
4. Check the IP address of the camera and then click [Exit] to quit
IPAddressAccess.
Note:
• IPAddressAccess allows you to restrict network types.
Item
Search
Exit
Manual Set
Auto Set
IPv4/IPv6
4
Click to update the display of IPAddressAccess.
Click to quit IPAddressAccess.
Select and click the displayed line of camera to show
[Manual Setting]. [Manual Setting] allows you to change
the IP address of camera.
Click it to show [Auto Setting]. [Auto Setting] allows you
to assign the IP addresses in a specified range to the
camera sequentially.
The IP address of selected Internet protocol is shown.
Settings