Keys; Using The Foxkey - Aastra 5380 User Manual

Using the display and operating elements

Keys

Using the Foxkey

The Foxkey has variable functions. These functions are displayed above the key. Sev-
eral contacts are stored under the broad Foxkey, which means you need to press the
Foxkey precisely under the function you want.
<long>
Using the Aastra M535 expansion key module
The configurable keys of the expansion key module Aastra M535 can be operated as
the other configurable keys. In addition, there are the following extensions:
• If you remove an Aastra M535 or if you modify the order of the connected expan-
sion key modules, the keys configuration does not change.
• The M535 display contrast
modules.
• The Aastra M535 display's
• The Aastra M535 has 3 levels with 15 configurable keys each.
22
Press the Foxkey under the position where the display shows the function you
want.
Keep the Foxkey held down for a moment (about 2 seconds).
applies to all connected Aastra M535 expansion key
Backlight setting is taken from the phone.
Shift key:
Allows to switch between the 3 levels. Press 1 x each to display the next level.
LED display:
Indicates which level is activated.
➔
If, for example, you are on level 3 of the Aastra M535 expansion key module
and an event occurs on level 1, the event is signalled by the red blinking LED
in position 1.
eud-1282/1.1 – R1.0 – 10.2011