Aastra 5380 User Manual page 98

Personalizing your phone
Function commands
You can use function commands to define a function to suit your personal require-
ments. A function can consist of one or more function commands, function codes,
and the phone number. You can either carry out a function directly or store it under a
function key (select
Tab. 1 The following function commands are available:
"A"
"I"
"X"
"P"
"Lxx"
"N"
"."
"Z"
"R"
"Y"
Tab. 2 Examples of how to define a function:
"IR"
"I201"
"I*21201X"
*/# Procedures
A list with all the function codes can be found in the "User's Guide */# Procedures" on
the Aastra 400 DocFinder as electronic
98
configurable function).
Seize line with highest priority
Seize line
Disconnect
1Pause 1 second before the next operation
Seize line xx (Line keys)
Use the phone number entered in call preparation
Control key function (up-circuit system)
Activate/deactivate DTMF mode
Use the phone number last dialled
Disconnect and reseize the line
Seize line ("I"),
Dial phone number last dialled ("R")
Seize line ("I") and dial phone number 201
Seize line ("I"),
activate call forwarding unconditional ("*21") to phone number 201,
disconnect ("X")
Notes:
• Functions that are not available via the menu can be activated using */# pro-
cedures (see "User's Guide */# Procedures" on the Aastra document
portal: www.aastra.com/docfinder).
• You can either type in a */# procedure directly or store it under a key.
• You can only activate certain */# procedures if the same function cannot be
obtained via the menu.
• The availability of certain */# procedures may be restricted depending on
the system and software version.
document.
eud-1282/1.1 – R1.0 – 10.2011