Dma Mode; S.m.a.r.t; 32-Bit Data Transfer; Ide Detect Timeout (Sec) - Silicon Graphics Rackable C2112-4G3 User Manual

DMA Mode

S.M.A.R.T.

32-Bit Data Transfer

IDE Detect Timeout (Sec)

PCI/PNP Settings Menu

Clear NVRAM

Plug & Play O/S
007-5759-001
Selects the DMA Mode. Options are Auto, SWDMA0, SWDMA1, SWDMA2, MWDMA0.
MDWDMA1, MWDMA2, UDMA0. UDMA1, UDMA2, UDMA3, UDMA4 and UDMA5.
(SWDMA=Single Word DMA, MWDMA=Multi Word DMA, UDMA=UltraDMA.)
Self-Monitoring Analysis and Reporting Technology (SMART) can help predict impending drive
failures. Select "Auto" to allow BIOS to auto detect hard disk drive support. Select "Disabled" to
prevent AMI BIOS from using the S.M.A.R.T. Select "Enabled" to allow AMI BIOS to use the
S.M.A.R.T. to support hard drive disk. The options are Disabled, Enabled, and Auto.
Select "Enabled" to activate the function of 32-Bit data transfer. Select "Disabled" to deactivate
the function. The options are Enabled and Disabled.
Use the +/- keys to adjust and select the time out for detecting ATA/ATAPI devices. The default
value is 35.
Select Yes to clear NVRAM during boot-up. The options are Yes and No.
Select Yes to allow the OS to configure Plug & Play devices. (This is not required for system boot
if your system has an OS that supports Plug & Play.) Select No to allow AMIBIOS to configure
all devices in the system.
Advanced NorthBridge Chipset Control and Configuration
67