Monitor / Squelch Off - HYT TC-610 Owner's Manual

Battery Strength
70% - 100%
50% - 70%
30% - 50%
10% - 30%
Less than 10%

Monitor / Squelch Off

Squelch Off
Causes the radio to forcibly unmute speaker to here activities on the current channel, whatever
the receive condition is. The radio speaker outputs audio when audio signal is present, or
background noise will be heard if no audio signal is detected.
Press the function key to enter the Squelch Off mode, and press it again to exit.
Squelch Off Momentary
Causes the radio to forcibly unmute speaker to here activities on the current channel, whatever
the receive condition is. The radio speaker outputs audio when audio signal is present, or
background noise will be heard if no audio signal is detected.
Holds down the function key to enter the Squelch Off Momentary mode, and release it to exit.
LED Indication
Green
Orange
Red
No indication is shown when programmable key is pressed; LED
flashes red while radio is operating. While the radio standby, LED
flashes red and a low-pitched tone sounds at intervals of a preset
time (defaulted as 10s). The interval can be set by programming
software.
No indication is shown when programmable key is pressed; at
the time, radio can only receive or standby (Tx is disabled). While
the radio standby, LED flashes red and a low-pitched tone
sounds at intervals of a preset time (defaulted as 10s). The
interval can be set by programming software. If PTT key is held
down, an alert tone indicating low-voltage Tx inhibt would sound.
24
TC-610/TC-610P Owner's Manual