HYT TC-610 Owner's Manual page 26

Priority Channel Scan
If you prioritize Channel 2 as Priority 1, the scan operation would change as figure 17 shown
below.
Figure 17
Scan On/Off
You can enter scan mode through the following two methods:
1. Key operation
Press the programmed Scan key to enter scan mode, provided that there're no less than 2
members in the scan list.
2. Auto
When Auto Scan is enabled for a channel, the radio shall automatically enter scan mode when it
is switched to the channel.
You can exit scan mode through the following three methods:
1. Key operation
Press the programmed Scan key to exit scan mode.
2. Auto
The radio automatically exits from scan mode when it is switched to another channel.
3. Turn the radio off.
Talk Back
You can respond to any calls received during the scan process by pressing the PTT.
Priority Channel Scan
Enable you to constantly monitor & keep an update on the activities on the most commonly used
TC-610/TC-610P Owner's Manual
26