Code Squelch - HYT TM-800U Manual

between digits. Default: 10 digits per second
▇ Store DTMF Numbers
You can store DTMF numbers (16 digits maximum) in each of the 32 Auto Dial memory
locations (01～32).
1. Press the [#] key, "D----------" appears on the LCD.
2. Enter the DTMF number (16 digits maximum).
You can enter the digits 0-9, A-F.
To enter A,B,C,D,E,F, hold down the [PTT] key, then enter 2, 5, 8, 0, *, # respectively.
3. Press the [#] key, "------" appears on the LCD indicating the memory location.
4. Enter the desired memory location number (01～32).
5. Press the [#] key again to store the DTMF number into the memory location.
If you enter a wrong digit or decide not to dial the number, press any key other than the
power switch on the front panel to exit.
▇ Confirm Stored DTMF Numbers
1. Press the [*] key, "A---" appears on the LCD.
2. Enter the desired memory location number (01～32).
The stored DTMF number or caller ID is displayed on the LCD. Press any key other
than the [PTT] key, the original display is restored.
▇ Dial Stored DTMF Numbers
1. Press the [*] key, "A---" appears on the LCD.
2. Enter the desired memory location number (01～32).
The stored DTMF number or caller ID is displayed on the LCD.
3. Press the [PTT] key to place the call.
▇ Clear Stored DTMF Numbers
1. Press the [#] key, "D----------" appears on the LCD.
2. Press the [#] key again, "D Clear" appears on the LCD.
3. Enter the desired memory location number (01～32).
To cancel the process, press any key other than [0]～[9].
4. Press the [#] key, the stored DTMF number is cleared.
▇ Redial
1. Press the [*] key, "A--" appears on the LCD.
2. Press the [0] key twice, the last number (16 digits maximum) you dialed is redialed.
The redialed number is displayed on the LCD.
3. Press the [PTT] key to place the call.
Note: The redial memory is cleared when the radio is turned off.

Code Squelch

The code squelch feature can be programmed by your dealer.
If this feature is activated, squelch turns on only when the received DTMF/2-Tone/5-Tone
code matches the radio ID code (set by your dealer). Otherwise, your radio will not
21