HYT TC-610 Owner's Manual page 9

Power adjust
VOX
*Channel Selector Knob
Rotate the knob to select from channel 1 to 16.
* Radio On-Off/Volume Control Knob
Rotate the knob clockwise to turn the radio on, rotate the knob fully counter-clockwise until a
click is heard to turn the radio off.
Turn the knob clockwise to increase the volume, or counter-clockwise to decrease the
volume.
*Battery latch
Used to remove the battery.
* Accessory Jack
The jack is used to connect speaker, microphone, external PTT, earpiece, programming
cable and cloning cable.
TC-610/TC-610P Owner's Manual
is in process.
Scan Start Alert Tone (programmable by your dealer):
a beep is heard.
Scan Exit Alert Tone (programmable by your dealer):
a beep is heard.
Priority Channel Scan Alert Tone (programmable by
your dealer): when scanning, if the current channel is
the priority channel, the radio sounds a Beep.
A low-pitched tone is heard when transmit power is
adjusted from high power to low power.
A high-pitched tone is heard when transmit power is
adjusted from low power to high power.
A high-pitched tone is heard when the VOX feature is
activated.
A low-pitched tone is heard when the VOX feature is
disabled.
9