Generator Earthing Kit (Optional) - Kaco Powador 2002 Operating Instructions Manual

Secti o n 5 · Insta ll ati on and S ta rt-U p
The assembly of the Tyco and MC plug connectors is shown in
fi gure 5.9 and fi gure 5.10 respectively.
Figure 5.9: Assembly of the MC plug connectors
Figure 5.10: Assembly of the Tyco plug
connectors

5.4 Generator earthing kit (optional)

Some module manufacturers stipulate that the solar modules
must be earthed at the generator (especially when applied to
thin-fi lm modules). An optional earthing kit for use on galvan-
ically isolated Powador inverters is available for this purpose.
WAR NIN G
Disconnect the inverter from all power sources
before beginning installation.
Installation of the earthing kit:
1. Use a screwdriver to remove the cover for the fuse holder
on the front of the inverter.
2. Attach the fuse holder using the screws provided.
3. Connect the black cable to the DC terminal labelled
"GFDI" (underneath).
4. Attach the PE cable (green/yellow) to the corresponding
PCB fi tting using the cable shoe.On the Powador 4202-
6002, you also have the option of inserting the PE cable
with a wire sleeve into the PE terminal.
Installation Instructions Powador 2002 / 3002 / 4202 / 5002 / 6002_EN
GN/YE
Generator
earthing kit
PV- PV- DC- GFDI DC+ PV+ PV+
2 1 1 2
PV- PV- DC- GFDI DC+ PV+ PV+
3 3
(fi g. 5.13
+
fi g. 5.15)
BK
Figure 5.11: Powador 2002-3002 with generator
earthing kit
GN/YE
Generator
earthing kit
PE PV- PV- DC- GFDI DC+ PV+ PV+
2 1 1 2
(fi g. 5.14
PE PV- PV- DC- GFDI DC+ PV+ PV+
3 3
+
fi g. 5.16)
BK
Figure 5.12: Powador 4202-5002-6002 with
generator earthing kit (via PE terminal)
GN/YE
BK
BU
GN/YE
Page 19
BK
BU
GN/YE