About This Documentation; Retention Of Documents; Symbols Used In This Document; Ce Marking - Kaco Powador 2002 Operating Instructions Manual

S e ctio n 1 · About T h is Do cume nta tion

1 About This Documentation

The following notes guide you through all of the documenta-
tion. Additional documents are applicable in conjunction with
these operating and installation instructions.
We assume no liability for any damage caused by failure to
observe these instructions.
Other applicable documents
When installing the inverters, be sure to observe all assembly and
installation instructions for components and other parts of the
system. These instructions are delivered together with the respec-
tive components and other parts of the system.
AT TE N TI O N
Read the manual
We assume no liability for any damage caused by failure
to observe these instructions.

1.1 Retention of documents

Please pass these operating and installation instructions on to
the system operator. The system operator retains the docu-
ments. The instructions must be available whenever they are
needed.

1.2 Symbols used in this document

When installing the inverter, observe the safety instructions
included in these installation instructions.
Failure to observe a warning indicated in this
manner will directly lead to serious bodily injury
or death.
W AR NI NG
Failure to observe a warning indicated in this
manner may lead directly to serious bodily injury
or death.
C A UT IO N
Failure to observe a warning indicated in this
manner may directly lead to minor or moderate
bodily injury.
Page 4
D AN GE R
A TT EN TI O N
Failure to observe a warning indicated in this manner may
lead to damage to property.
Useful information and notes.
A C TI O N
This symbol indicates that a certain action is required.
I MP OR TA N T
Failure to observe this information may result in reduced
convenience or impaired functionality.
High voltage
Risk of fi re or explosion
Risk of burns
Disconnect before
starting work
Read the manual

1.3 CE marking

The CE marking is used to document that the Powador inverter
shown on the name plate fulfi ls the fundamental requirements
of the following relevant directives:
– Directive relating to electromagnetic compatibility
(Council Directive 2004/108/EC)
–
Low Voltage Directive
(Council Directive 2006/95/EC)

1.4 Name plate

The name plate showing the exact designation of the unit is
located on the support plate on the underside of the housing.
Installation Instructions Powador 2002 / 3002 / 4202 / 5002 / 6002_EN
N O TE