Rf Exposure - Sierra Wireless Airlink Raven XE HSPA User Manual

AirLink Raven XE HSPA User Guide
Note: A distance of at
least 20 cm must be
maintained at all times
between the antenna and
the user.
50
Antenna Considerations
Although the antenna model(s) used with these devices meet(s) the Industry
Canada Radio Frequency requirements, it is possible that the future customers
may swap them for different ones without network provider's knowledge and
approval. Such customers must be made aware of, and follow, the Radio
Frequency requirements applied in this Technical Approval:
• RSS-102 "Radio Frequency Exposure Compliance of Radiocommunication
Apparatus (All Frequency Bands)"
• RSS-129 "800 Mhz Dual-Mode CDMA Cellular Telephones"
• RSS-132e "Cellular Telephones Employing New Technologies Operating in
the Bands 824-849 Mhz and 869-894 Mhz"
• RSS-133 r1 "2 GHz Personal Communications Services"

RF Exposure

In accordance with FCC/IC requirements of human exposure to radiofrequency
fields, the radiating element shall be installed such that a minimum separation
distance of 20cm should be maintained between the antenna and the user's body.
This product is only to be installed by qualified personnel!
Warning:
To comply with FCC/IC regulations limiting both maximum RF output power and
human exposure to RF radiation, the maximum antenna gain must not exceed 5
dBi in the Cellular band and 4 dBi in the PCS band.
EU
Sierra Wireless hereby declares that the Raven XE devices conform to all the
essential requirements of Directive 1999/5/EC.
Products are marked with a CE and notified body number as shown here:
20080605