AirLink Raven XE HSPA User Guide
40
Digital Input
Contact Closure
Digital I/O
Figure 5-2: Digital Input Contact Closure
Examples of using the input with a switch to ground are:
•
When a door or other latch is opened or closed.
•
When counting pulses or other electronic events.
•
When a gauge reaches a certain point.
•
When a container fills or empties.
•
When a switch or valve is opened or closed.
•
When the tow bar is raised or lowered.
•
When connected to a sensor, the level of fuel in a vehicle.
•
When the trunk of a vehicle is opened or closed.
•
When the ignition is turned on or off.
Digital Output
Figure 5-3: Digital Output
Ground
20080408