Table of Contents
Advertisement
Introduction to the AirLink Raven XE
ACEmanager
ACEmanager, the ACEware remote configuration and monitoring tool, simplifies
deployment and provides extensive monitoring, control, and management
capabilities. ACEmanager gives you the power to manage your Sierra Wireless
AirLink communications platforms in real-time.
Figure 1-4: ACEmanager Home Screen
Simplified Deployment
ACEmanager provides the ability to remotely set up and configure your Sierra
Wireless AirLink products. Remote device setup and configuration reduces the
deployment timeline of your wireless solution and provides a quicker path to ROI.
Templates allow you to easily configure devices in your fleet with identical
settings, ensuring a simple, accurate deployment.
Monitor and Control
ACEmanager allows an administrator to remotely monitor a modem's status,
health and configuration settings. The user interface displays signal strength, cell
site information, byte counters and error conditions, enabling you to pinpoint any
issues and troubleshoot immediately.
ACEmanager enables remote configuration and parameter settings to be
changed or reset instantly over the air, change a device's port configuration, IP
address settings, GPS settings, and much more. After configuring one modem,
use the template feature to copy that device configuration to other devices.
Tip:
The configuration steps and examples in this user guide use ACEmanager.
Rev 3.0 Feb.12
13
Advertisement
Table of Contents
