Table of Contents
Advertisement
AirLink Raven XE HSPA User Guide
44
Figure 6-1: Connect To window
b. Change or verify the settings when the COM1 Properties window
displays:
· Bits per Second: 115200 (default)
· Data Bits: 8
· Parity: None
· Stop Bits: 1
· Flow Control: Hardware.
Figure 6-2: Port Settings at COM1 Properties
Tip:
If you have configured the Raven XE for settings different than the defaults for Bits
per second, Data bits, Parity, and/or Stop bits, you will need to use your changed settings.
c. Select OK.
If using Ethernet:
d. Select TCP/IP (Winsock) for "Connect using".
e. Enter the Raven XE's internal IP address in "Host address".
20080616
Advertisement
Table of Contents
