Features; Specifications; Receiving - Axminster TS200 Instruction Manual & Parts List

equipment-grounding conductor. If repair or replacement of the electric cord or plug is necessary, do not
connect the equipment-grounding conductor to a live terminal.
Check with a qualified electrician or service personnel if the grounding instructions are not completely
understood, or if in doubt as to whether the tool is properly grounded. Use only three wire extension cords
that have three-prong grounding plugs and three-pole receptacles that accept the tool's plug.
Repair or replace a damaged or worn cord immediately.

Features

FIG1

Specifications

Table size ... ........................................................................................................................... 535 x 400mm
---- with table extensions ......................................................................................................... 535 x 1000mm
Saw blade / bore sizeф ......................................................................................30mm arbor, 200mm dia
Motor ...........................................................................................................................1100w, 1 Ph, 230V
Blade speed .................................................................................................................................. 4700 RPM
Max. depth of cut at 90 degrees .......................................................................................................... 60mm
Max. depth of cut at 45 degrees ...................................................................................................... 40mm
Cutting width with table extension...................................................................................................... 750mm
Cutting width without table extension ................................................................................................150mm
Coupling joint for vacuum exhaust ф..............................................................................................50/25mm
Weight ............................................................................................................................. 45kgs
Receving
Remove the saw and accessories from the shipping carton and inspect for damage. Any damage should be
reported to your distributor and shipping agent immediately. Before proceeding further, read your instruction
manual thoroughly to familiarize yourself with proper assembly, maintenance and safety procedures.
Contents of box:
1 HM-saw blade ф200mm
1 Saw body with switch
1 Miter cut limit stop
1 Longitudinal limit stop 1 Slide rail
1 Slitting wedge 1 Safety cover
Operating instruction
6