Changing The Fuse; Specifications - Axminster PROFESSIONAL AP406SS Manual

The Trade scroll saws takes a 5 Amp 20 x 5mm glass fuse,
follow the instrctions below on how to change the fuse.
1. Unplug the scroll saw from the mains.
2. Unscrew the fuse cap to the rear of the scroll saw
and remove the 5 AMP fuse.
Code
Model
Rating
Power
Throat
Stroke
Cuts per Minute
Max Depth of Cut
Noise Level dB (A)
Table Size
Arm Tilt
Overall L x W x H
Weight
MAINTENANCE, ADJUSTMENTS & SERVICING
3. Insert a new 5 AMP fuse into the end cap holder.
4. Re-insert the fuse assembly and finger tighten.
107653
AP406SS (KC-16)
Professional
230V 50Hz 320W
406 mm
18 mm
400 -1,400
51 mm
67dB(A)
305 x 470 mm
Left 35° Right -45°
686 x 380 x 432 mm
24.5 kg
15
Lock nut
Tension screw

CHANGING THE FUSE

SPECIFICATIONS

107654
AP535SS (KC-21)
Professional
230V 50Hz 320W
535 mm
400 -1,550
67dB(A)
345 x 597 mm
Left 35° Right -45°
812 x 380 x 387 mm
18 mm
51 mm
29.5 kg