Table of Contents
Advertisement
Chapter 5 • Installing a cradle-type radio assembly
46
1037312-0001 Revision A
4. Tighten the bolts securely.
Match round hole in adapter to
second hole from bend in tube.
T0172014
Figure 36: Mounting the radio on the feed support tube
5. Remove the protective packing material from the feed horn
window.
This completes installation of the radio assembly.
5/16-18
×
2.5-inch
hex bolts
Match oval slot in
adapter to oval slot at
the end of the tube.
Mounting adapter
Feed support tube
Advertisement
Table of Contents
