Table of Contents
Advertisement
X here identifies horizontal shim. This X
is visible when the parts are assembled.
TRIA
Horizontal shim in place
O-ring
Horizontal shim
Figure 24: Horizontal shim and vertical shim for transmit polarization
Figure 24 illustrates the difference between the horizontal
shim and vertical shim. Note the positions of the alignment
pins.
Alignment
pins
4. Remove the horizontal shim and O-ring.
Vertical shim in place
(In this photograph, the TRIA
has not yet been rotated.)
" – " mark here identifies vertical shim. This
mark is visible when the parts are assembled.
Alignment
pins
Vertical shim
Chapter 4 • Installing a J-type radio assembly
1037312-0001 Revision A
33
Advertisement
Table of Contents
