Adding Or Editing A Port Triggering Rule; Figure 23: The Firewall > Port Triggering > Add/Edit Screen; Table 21: The Firewall > Port Triggering > Add/Edit Screen - Hitron CGN User Manual

5.5.1

ADDING OR EDITING A PORT TRIGGERING RULE

To add a new port triggering rule, click Add in the Firewall > Port Triggering
screen.
To edit an existing port triggering rule, select the rule's radio button (
Firewall > Port Triggering screen and click the Edit button.
The following screen displays.
Figure 23: The Firewall > Port Triggering > Add/Edit Screen
The following table describes the labels in this screen.
Table 21: The Firewall > Port Triggering > Add/Edit Screen
Application Name
Trigger Port Range
70 70
HITRON CGN USER'S GUIDE
Enter a name for the application for which you want to
create the rule.
NOTE: This name is arbitrary, and does not affect
functionality in any way.
Use these fields to specify the trigger ports. When the
CGN detects activity on any of these ports originating
from a computer on the LAN, it automatically opens the
Target ports in expectation of incoming traffic.
Enter the start port number in the first field, and the end
port number in the second field.
To specify only a single port, enter its number in both
fields.
Version 2.0, February 2012. Copyright
Version 2.0, February 2012. Copyright
) in the
2012 Hitron Technologies
2012 Hitron Technologies