Table of Contents
Advertisement
Table 20:
The Basic: Port Triggering Screen (continued)
Timeout (ms)
Twoway Status
Status
Add
Edit
Delete
Help
4.6.1
Adding or Editing a Port Triggering Rule
To add a new port triggering rule, click Add in the Basic > Port Triggering
screen.
To edit an existing port triggering rule, select the rule's radio button in the Basic
> Port Triggering screen and click the Edit button.
NOTE:
Ensure that Enabled is selected in the Basic > Port Triggering screen in
order to add or edit port triggering rules.
The following screen displays.
63
63
Version 4.2.7.2, 05/2014. Copyright
Version 4.2.7.2, 05/2014. Copyright
This displays the time (in milliseconds) after the CGNV
opens the Target ports that it should close them.
Usually a port triggering rule works for two IP
addresses; when a rule is enabled, other IPs will also be
allowed to use the rule as a trigger.
Use this field to turn the rule On or Off.
Click this to define a new port triggering rule. Port
triggering must first be set to Enabled. See
Editing a Port Triggering Rule
information on the screen that displays.
Select a port triggering rule's radio button and click this
to make changes to the rule. Port triggering must first be
set to Enabled. See
Adding or Editing a Port Triggering
Rule
on page
63
for information on the screen that
displays.
Select a port forwarding rule's radio button and click this
to remove the rule. The deleted rule's information
cannot be retrieved.
Click this to see information about the fields in this
screen.
Hitron CGNV User's Guide
Adding or
on page
63
for
2012 Hitron Technologies
2014 Hitron Technologies
BASIC
Advertisement
Table of Contents
