5.3
THE FILTER SETTING SCREEN
Use this screen to configure Media Access Control (MAC) address filtering on the
LAN, and to configure IP filtering.
NOTE:
To configure MAC address filtering on the wireless network, see The Access
Control Screen on page 90.
You can set the CGN to allow only certain devices to access the CGN and the
network, or to deny certain devices access.
NOTE:
To see a list of all the computers connected to the CGN on the LAN, click the
Connected Computers button in the Firewall > IP Filtering, Forwarding,
Port Triggering or Firewall Options screens.
You can turn IP filtering on or off, and configure new and existing IP filtering rules.
Click Firewall > Filter Setting. The following screen displays.
57
57
HITRON CGN USER'S GUIDE
Version 2.0, February 2012. Copyright
Version 2.0, February 2012. Copyright
2012 Hitron Technologies
2012 Hitron Technologies