Hitron CGN User Manual page 69

Table 20: The Firewall > Port Triggering Screen
#
Application Name
Port Range
Protocol
Timeout (ms)
Enable
Add New
Edit
Delete
Apply
Cancel
Help
69 69
HITRON CGN USER'S GUIDE
This displays the arbitrary identification number
assigned to the port triggering rule.
This displays the arbitrary name you assigned to the
rule when you created it.
These fields display the ports to which the rule applies:
The Trigger field displays the range of outgoing
ports. When the CGN detects activity (outgoing
traffic) on these ports from computers on the LAN, it
automatically opens the Target ports.
The Target field displays the range of triggered
ports. These ports are opened automatically when
the CGN detects activity on the Trigger ports from
computers on the LAN.
This displays the protocol of the port triggering rule.
This displays the time (in milliseconds) after the CGN
opens the Target ports that it should close them.
Use this field to turn each port triggering rule on or off.
Select this checkbox to enable the port triggering
rule.
Deselect this checkbox to disable the port triggering
rule.
Click this to define a new port triggering rule. See
Adding or Editing a Port Triggering Rule
information on the screen that displays.
Select a port triggering rule's radio button (
this to make changes to the rule. See
a Port Triggering Rule
screen that displays.
Select a port triggering rule's radio button (
this to remove the rule. The deleted rule's information
cannot be retrieved.
Click this to save your changes to the fields in this
screen.
Click this to return the fields in this screen to their last-
saved values without saving your changes.
Click this to see information about the fields in this
screen.
Version 2.0, February 2012. Copyright
Version 2.0, February 2012. Copyright
on page
Adding or Editing
on page 70 for information on the
2012 Hitron Technologies
2012 Hitron Technologies
70 for
) and click
) and click