Hitron CGN User Manual page 48

Table 11: The WAN/LAN > IP Screen (continued)
Subnet Mask
Gateway Address
Primary DNS
Server
Secondary DNS
Server
Private LAN IP Setting
Private LAN IP
Address
Subnet Mask
Domain Suffix
Private LAN DHCP Setting
Enable LAN DHCP
Lease Time
DHCP Start IP
Connected Computers
Host Name
48 48
HITRON CGN USER'S GUIDE
This field displays the CGN's WAN subnet mask.
This field displays the address of the device on the WAN
to which the CGN is connected.
These fields display the primary Domain Name Servers
that the CGN uses to resolve domain names into IP
addresses.
These fields display the secondary Domain Name Servers
that the CGN uses to resolve domain names into IP
addresses.
Use this field to define the IP address of the CGN on the
LAN.
Use this field to define the LAN subnet. Use dotted
decimal notation (for example, 255.255.255.0).
Use this field to define the domain that you can enter into a
Web browser (instead of an IP address) to reach the CGN
on the LAN.
It is suggested that you make a note of your device's
Domain Suffix in case you ever need to access the
CGN's GUI without knowledge of its IP address.
Select this if you want the CGN to provide IP addresses to
network devices on the LAN automatically.
Deselect this if you already have a DHCP server on your
LAN, or if you wish to assign IP addresses to your
computers and other network devices manually.
Use this field to define the time after which the CGN
renews the IP addresses of all the network devices
connected to the CGN on the LAN (when DHCP is
enabled).
Use this field to specify the IP address at which the CGN
begins assigning IP addresses to devices on the LAN
(when DHCP is enabled).
This displays the name of each network device connected
on the LAN.
Version 2.0, February 2012. Copyright
Version 2.0, February 2012. Copyright
2012 Hitron Technologies
2012 Hitron Technologies