Hitron CGN User Manual page 61

Table 16: The Firewall > Filter Setting Screen (continued)
All IP Filtering Rules
Select
#
Application Name
Port Range
Protocol
IP Address Range
Enable
Add New
Edit
61 61
HITRON CGN USER'S GUIDE
Use this to turn IP filtering on or off.
Deselect the checkbox to enable IP filtering.
Select the checkbox to disable IP filtering (default).
NOTE: You can add, edit or delete IP filtering rules only
when this checkbox is deselected.
Select an IP filtering rule's radio button (
clicking Edit or Delete.
This displays the arbitrary identification number assigned
to the IP filtering rule.
This displays the arbitrary name you assigned to the rule
when you create it.
This displays the start and end values of the ports to which
communications from the specified IP addresses is not
permitted.
This displays the type of communications that are not
permitted:
TCP displays if communications via the Transmission
Control Protocol are not permitted.
UDP displays if communications via the User
Datagram Protocol are not permitted.
TCP/UDP displays if communications via the
Transmission Control Protocol and the User Datagram
Protocol are not permitted.
This displays the start and end IP address from which
communications to the specified ports are not permitted.
Use this field to turn each IP filtering rule on or off.
Select this checkbox to enable the IP filtering rule.
Deselect this checkbox to disable the IP filtering rule.
Click this to define a new IP filtering rule. See
Editing an IP Filtering Rule
the screen that displays.
Select an IP filtering rule's radio button (
to make changes to the rule. See
Filtering Rule on page
that displays.
Version 2.0, February 2012. Copyright
Version 2.0, February 2012. Copyright
) before
on page 62 for information on
) and click this
Adding or Editing an IP
62 for information on the screen
2012 Hitron Technologies
2012 Hitron Technologies
Adding or