Supply Specifications; Media; Media Type - Toshiba B-852-TS22-QQ-R Owner's Manual

7. SUPPLY SPECIFICATIONS

7. SUPPLY SPECIFICATIONS

7.1 Media

Please make sure that the media that will be used is approved by TOSHIBA TEC. The warranty does not apply
when a problem is caused by using media that is not approved by TOSHIBA TEC.
For information regarding TOSHIBA TEC approved media, please contact a TOSHIBA TEC authorised service
representative.

7.1.1 Media Type

Two types of media can be loaded for this thermal transfer and direct thermal printer label or tag. The table
below shows size and shape of the media available for this printer.
Stop
position
Cut position
Item
Minimum media pitch
Label length
Width including backing paper
Gap length
Black mark length (Tag paper)
Effective print width
Print speed up/slow down area
Black mark length (Label)
Max. print length
Maximum effective length for on the fly issue
Max. outer roll diameter
Thickness
Label
Label dispensing mode
Label + backing paper
Tag
Black Mark
(on reverse side) Refer to
NOTE 3 below.
Stop
position
Cut position
Feed Direction
Batch mode
15.0
Min. 12.5
100.0- 242.0
2.5 – 20.0
2.0 – 20.0
E7- 1
ENGLISH VERSION EO1-33055
Black Mark
Tag paper
(on reverse side)
Cut mode
Label: 38.0
Tag: 25.4
Min. 32.0
100.0 – 235.0
6.0 – 20.0
2.0 – 10.0
216.8±0.2
1.0
6.0 – 20.0
640.0
320.0
φ230
0.13 – 0.18
0.08 – 0.18
7.1 Media
[Unit: mm]