Toshiba B-852-TS22-QQ-R Owner's Manual page 74

2. PRINTER SETUP
2.12 Position and Print
Tone Fine
Adjustment (Cont.)
NOTES:
Choose a desired value by using the
[RESTART] or [FEED] key.
Pressing the [FEED] key one time
causes a –1 step change, up to
–15 steps.
Pressing the [RESTART] key one
time causes a +1 step change, up to
+6 steps .
NOTES:
Choose a desired value by using the
[RESTART] or [FEED] key.
Pressing the [FEED] key one time
causes a –1 step change, up to
–15 steps.
Pressing the [RESTART] key one
time causes a +1 step change, up to
+10 steps .
Ribbon Motor Voltage Fine Adjustment
When the ribbon is slack or wrinkled and printing is affected, fine adjust
the ribbon motor torque by using the following procedure.
Take-up Motor (RBN ADJ <FW>)
[RESTART]
[FEED]
After selecting a fine adjustment value or to skip this menu, press the
[PAUSE] key.
Feed Motor (RBN ADJ <BK>)
[RESTART]
[FEED]
After selecting a fine adjustment value or to skip this menu, press the
[PAUSE] key.
E2-61
2.12 Position and Print Tone Fine Adjustment
RBN ADJ<FW> -10
RBN ADJ<FW> +6
RBN ADJ<FW> +5
RBN ADJ<FW> +4
RBN ADJ<FW> -14
RBN ADJ<FW> -15
RBN ADJ<BK> -5
RBN ADJ<BK> +10
RBN ADJ<BK> +9
RBN ADJ<BK> +8
RBN ADJ<BK> -14
RBN ADJ<BK> -15
ENGLISH VERSION EO1-33055
High
Motor Torque
Low
High
Motor Torque
Low