Paper Supply Led Indicator; Printer Ready Led Indicator; Indicators And Controls - Toshiba SureMark 4610 2CR Hardware Manual

B
A
Figure 7. Indicators and controls
Device
A
B
C
D
E
F
Table 4 describes the LED indicators that show the status of the paper supply:
Table 4. Paper supply LED Indicator
LED Indicator ( )
C
Amber (orange)
Table 5 describes the LED indicators that communicates the printer status:
Table 5. Printer ready LED indicator
Printer ready ( )
D
Amber Blinking (0.5s
(orange) on / 0.5s off)
Blipping (0.25s
on / 1.75s off)
C
D
E
F
Description
Paper door release button
Paper feed button; press to advance the customer receipt
paper
Paper supply LED indicator (see Table 4)
Printer ready LED indicator (see Table 5)
Document presence LED indicator (see Table 6)
Document feed button; press to advance the document
On
Off
Blinking
Station not ready; recoverable error: paper jam, cover open,
cutter jam
Offline or hardware failure: Cannot communicate with
paper motion sensor, or the thermal printhead, MLC or IFC
problem
Chapter 1. Introducing the SureMark 4610 Models 2CR and 2NR printers
Paper out
Paper sufficient
Critically low paper supply
23