Toshiba B-852-TS22-QQ-R Owner's Manual page 67

2. PRINTER SETUP
2.11 Print Test (Cont.)
When using an optional Cutter Module
It is necessary to set the issue mode, cut position, etc. for the Printer
Driver or TPCL (TEC Printer Command Language) in accordance with
your printing condition.
For details of the TPCL, refer to the B-852 Series External Equipment
Interface Specification stored in the CD-ROM.
Regarding how to use the Printer Driver, refer to the Help for the
Windows Printer Drivers screen.
To gain maximum performance and life from the Cutter Module, periodic
cleaning is required.
Before starting a cleaning, be sure to TURN OFF the printer to avoid risk
of injury.
For details of cleaning, refer to Section 4.1.3 Optional Cutter Module.
E2-54
ENGLISH VERSION EO1-33055
2.11 Print Test