Toshiba B-852-TS22-QQ-R Owner's Manual page 38

2. PRINTER SETUP
2.9.1 Parameter Setting
(Cont.)
NOTE:
If the printer and the PC are
connected by USB, plug & play will
be automatically enabled, regardless
of the setting of this parameter.
(18) Expansion I/O Interface Type Selection
This parameter is to choose a type of the Expansion I/O interface
operating mode.
This parameter should be set depending on the expansion I/O control
specification of the device to be connected via the expansion I/O
interface. For details, refer to the External Equipment Interface
Specification.
When "<2>PARAMETER SET" appears, press the [PAUSE] key until
the following display appears.
EX.I/O TYPE1
Use the [FEED] or [RESTART] key to select a desired option.
[RESTART]
[FEED]
After selecting an Expansion I/O Interface type, press the [PAUSE] key.
(19) Plug & Play Selection
This parameter is to choose whether to enable a Plug & Play function.
When "<2>PARAMETER SET" appears, press the [PAUSE] key until
the following display appears.
PLUG & PLAY OFF
Use the [FEED] or [RESTART] key to select a desired option.
[RESTART]
[FEED]
After selecting a Plug & Play, press the [PAUSE] key.
E2-25
ENGLISH VERSION EO1-33055
2.9 Setting an Operating Environment
EX.I/O TYPE1
EX.I/O TYPE2
PLUG & PLAY OFF
PLUG & PLAY ON
TYPE1: Standard mode
TYPE2: Inline mode
Unavailable
Available