Deutshe14; Load Factory Default; Disable/Enable Deutshe14; Deutshe14 Code Id - Newland NLS-FM100-M-U Integration Manual

Symbols

Deutshe14

Load Factory Default

Disable/Enable Deutshe14

Enable Deutshe14，Do Not Transmit Check Digit
【Pro CMD：99911502】
Enable Deutshe14， Transmit Check Digit
【Pro CMD：99911503】
When the scanner can not read Deutshe14, please read "Enable Deutshe14" and try again
If Deutsche 14 and ITF-14 are enabled at the same time, the scanner may mis-decode or
has chaos in programming. So it is better to disable ITF-14 if not used.

Deutshe14 Code ID

Example of setting Deutshe14 Code ID to "p" (0x70)
1. Read Enable Code Programming barcode.
2. Read Deutshe14 Code ID Setting barcode.
3. Read Following Barcodes: "7", and "0"
4. Read Save barcode
5. Read Disable Code Programming barcode.
nlscan.com
Load Deutshe14 Factory Default Deutshe14 Factory Default Factory Default
【Pro CMD：99911500】
Code ID Setting
【Pro CMD：99911504】
Code Programming ON
Code Programming OFF
Disable Deutshe14
【Pro CMD：99911501】
Tools
Page 75