Table of Contents
Advertisement
General Requirements
ESD
ESD protection has been taken into account when designing the EM2039 and the engine is shipped in
ESD safe packaging. Always exercise care when handling the engine outside its package. Be sure
grounding wrist straps and properly grounded work areas are used.
Dust and Dirt
The EM2039 must be sufficiently enclosed to prevent dust particles from gathering on the imager and
lens. Dust and other external contaminants will eventually degrade the engine's performance.
Ambient Environment
The following environmental requirements should be met to ensure good performance of the EM2039:
Operating Temperature
Storage Temperature
Thermal Considerations
Electronic components in the EM2039 generate heat during the course of their operation. Operating the
EM2039 in continuous mode for an extended period may result in an increase in temperature inside the
engine. The following precautions should be taken when integrating the EM2039:
Reserve sufficient space for good air circulation during design.
Avoid wrapping the EM2039 with thermal insulation materials such as rubber.
3
Chapter 2 Installation
Humidity
-20℃ to 60℃
-40℃ to 80℃
5% to 95% (non-condensing)
Advertisement
Table of Contents
