Initial Setup - Denso BHT-825QW User Manual

BHT-825Q series

2.4 Initial Setup

Turn ON the power after inserting the fully charged battery cartridge into the BHT.
The clock will not have been set at the time of purchase, and therefore it is necessary to set the date and time when
turning ON the power for the first time.
1.
Press the Power key (
The screen to the right displays.
Press the Power key at least 1 second after data
− Point −
backup. Refer to "Turning OFF the Power" on data
backup.
2.
Enter the date and time using the numeric keys.
[Ex.] : April 5, 2009, 14:20
Enter the last two digits for the year, and enter the
− Point −
time in 24-hour clock format.
3.
Press the ENT key to set the date and time.
The screen to the right displays when the date and time are set.
4.
Press numeric key 1 followed by ENT and select [1:Yes].
A scanning demo commences.
The scanning demo is a program that allows codes to be scanned without a user program. Press the
trigger switch to enable code scanning.
Refer to "Chapter 3 Basic Operation" – "3.1 Reading Codes" and read a code .
By selecting [2:No], the power turns OFF.
− Point −
20
) to turn ON the BHT power.