Initial Setup - Denso BHT-805B User Manual

BHT-805B

2.4 Initial Setup

Turn ON the power after inserting the fully charged battery cartridge into the BHT.
The date and time are not set at the time of purchase. You are required to set the date and time when turning ON the
power for the first time.
1.
Press the Power key (
The screen to the right displays.
2.
Enter the date and time using the numeric keys.
[Ex.] : April 5, 2009, 14:20
− Point − Enter the last two digits for the year, and enter the
time in 24-hour clock format.
3 .
Press the ENT key to set the date and time.
The screen to the right displays when the date and time are set.
4.
Press numeric key 1 and the ENT key. Then, select [1:Yes].
A scanning demo commences.
The scanning demo is a program that allows barcodes to be scanned without a user program. Press the
trigger switch to enable barcode scanning.
Refer to "Chapter 3 Basic Operation" – "3.1 Scanning Barcodes" and scan a barcode .
The power turns OFF by selecting [2:No].
− Point −
20
) to turn ON the BHT.