System Menu; Executing Setup (Setup Menu) - Denso BHT-825QW User Manual

4.5 SYSTEM MENU

4.5.1 Executing Setup (SETUP Menu)

The BHT setup can be effectively executed using the BHT Setting and clone functions.
The following explains setup using two BHTs with the clone function. Use the procedure below for BHT
setup.
1.
Select "0: SETUP" at the SYSTEM MENU and then press the ENT key.
The screen on the right displays.
"1: CLONE":
Select to use two BHTs to create a BHT clone (s).
The clone function resembles the conventional HT-HT copy function,
but differs according to the points in the table below.
"2:BHT Setting":
For details, refer to the "BHT Setting User's Manual."
OS Copy
Overwrite copy
(The file in the receiving device is overwritten
by the file from the transmitting device.)
File Copy
Clone
(Files in both the receiving and transmitting
devices are identical.) [Default]
General system setting values (excluding the
items below.)
OS Setting Values
Password settings for wireless/FTP, etc.
Copy
IP characteristic value (only when "0.0.0.0")
copy
Progressive display
Display
History (usage history)
Target clone selection (OS)
Post-function execution operations (reboot
designations, etc.)
Setting Values
Copy mode (overwrite/clone)
Authentication key (*1)
Operational
Communication settings
Environment
(*1): The authentication key is protected due to password cloning for wireless/FTP, etc.
Press the BS/C key to return to the SYSTEM MENU.
Function
2D Code Handy Terminal
Clone
Available Not Available
Available
Available Not Available
Available
Available Not Available
Available Not Available
Displayed for Each File Forwarding
Item Progression Only
Available Not Available
Available Not Available
Designations No Designations
Available
Available Not Available
Available Not Available
Fixed
（IrDA: 460800）
HT-HT Copy
Available
Available
Available
Optional
53