Denso BHT-825QW User Manual page 109

BHT-825Q series
"3:MULTI-LINE"：Multi-line code
1.
Select "3:MULTI-LINE" at SET READ CODE menu and then press
the ENT key.
SET MULTI-LINE screen displays, allowing the multi-line code to be set to
enable/disable and the reading code can be set.
"1：READING" : Enable/disable multi-line code.
"2：1ST LINE"：Set the first line of the barcode to be set.
"3：2ND LINE"：Set the second line of the barcode to be set.
"4：3RD LINE"：Set the third line of the barcode to be set
Multiline is limited to 3 lines, and is compatible with 9 types of the reading
code.
（EAN-13/UPC-A, EAN-8, UPC-E、ITF, Codabar, Code 39, Code 93, Code 128）
2.
Use the cursor keys ([▲] [▼]) or numerical keys ([1] [2] [3] [4]) to select the item to be set.
3.
Use the cursor keys ([◄] [►]) to select settings value.
Press the cursor keys ([◄] [►]) while "2：1ST LINE", "3：2ND LINE" or "4：3RD LINE" is being selected to
change the barcode at the line where the cursor is located. Press ENT key for the detailed settings of the
barcode being selected. Press the BS/C key for the settings value to be valid and then return to the SET
READ CODE screen.
The Multi-line code and bar code don't interfere each other. EAN-13/UPC-A can be read
━ Point ━
when EAN/UPC –A is selected on the 1ST and 2ND LINE of Multi-line code even though
"Disable EAN-13/UPC-A" is selected at SET BARCODE.
4.
Press the BS/C key for the settings value to be valid and then return to the SET READ CODE
screen.
"EAN-13/UPC-A"：Detailed settings of EAN-3/UPC-A for the Multiline code
1.
Select "EAN-13/UPC-A" at SET MULTI-LINE menu and then press
the ENT key.
SET MULTI-LINE [EAN-13 UPC-A] screen displays.
"1：1ST CHARACTER"：
"2：2ND CHARACTER"：
Allocate "?，0～9" to the first and second characters of EAN-13/UPC-A
(country flags).
94