Denso BHT-825QW User Manual page 112

Set the value of minimum number of digits to less than that of maximum number of digits. If
━ Point ━
the value of minimum number of digits is larger than that of maximum number of digits,
error occurs when reading.
Set the minimum/maximum number of digits within the setting range stated above. If the
value is out of the setting range, error occurs.
"5：CD CHECK"：
"ON" ：It reads only when check digits are correct. It doesn't read when check digits are not corrct
or no check digits are found.
"OFF"：It reads whether check digits are found or not.
2.
Use the cursor keys ([▲] [▼]) or numerical keys ([1] [2] [3] [4] [5]) to select the item to be set.
3.
Use the cursor keys ([◄] [►]) to select settings value.
4.
Press the ENT key or BS/C key for the settings value to be valid and then return to the SET
MULTI-LINE screen.
"CODABAR"：Detailed settings of Codabar (NW-7) for the Multiline code
1.
Select "CODABAR" at SET MULTI-LINE menu and then press the
ENT key.
SET MULTI-LINE [CODABAR] screen displays.
"1：MIN"：
Set minimum number of digits of Codabar
Setting range：
"2：MAX"：
Set maximum number of digits of Codabar.
Setting range：
Set the value of minimum number of digits to less than that of maximum number of digits. If
━ Point ━
the value of minimum number of digits is larger than that of maximum number of digits,
error occurs when reading.
Set the minimum/maximum number of digits within the setting range stated above. If the
value is out of the setting range, error occurs.
"3：START CODE"：
"4：STOP CODE"：
Allocate "?，A, B, C, D" to start/stop code of Codabar.
If "A, B, C, D" is allocated at the menu, limitation can be set to read only when allocated characters
matchs to the characters of CODABAR. It can read umlimitedly when "?" is allocated.
3～99
3～99
2D Code Handy Terminal
97