Digit Map - D-Link DVG-6004S User Manual

39

Digit Map

There are 50 sets of leading digit entries to choose voice routing interface – Auto select, PSTN or VoIP.
Default Call Route: The default call route can be Auto, VoIP, PSTN and Deny.
Auto (VoIP first): The call route is VoIP first, and the next is PSTN.
VoIP: The call route is VoIP only.
PSTN: The call route is FXO only.
Deny: The call will be deny if the dial-out number is not in the table.
Enable: Enable detection of this entry.
Leading Digits: The leading digits for the gateway to scan while user is dialing.
Total Digit Count: Total number of digits that the gateway should accept. 0 is that the
gateway scans leading digits only and disregards total digit count.
Route: The interface calls should go through if above conditions satisfied.