Write Text And Numbers; Special Characters - Aastra DT390 User Manual

OR
3. Press Delete and select Yes to delete the entry.
8.7

Write Text and Numbers

This section explains how to write text and numbers, useful when adding a
new entry in the phonebook.
For example, to add Smith in the phonebook, do the following:
1. Press 7777 for S.
2. Press 6 for m.
3. Press 444 for i.
4. Press 8 for t.
5. Press 44 for h.
6. Press OK when the name is complete.
While entering a name or a number, use the following keys for control and
navigation:
•
•
•
•
Note:
8.7.1

Special characters

Use the keypad to enter letters and characters. Press a key once for the
first letter or character, twice for the second, three times for the third, and
so on. The most common letters are printed above each key on the phone.
All the available letters and characters are shown in Figure 9.
1424_EN_LZT103087.doc Rev B2 2009-09-11
• Enter the first character(s) in the name and press Search.
The marked character is selected after a time out or when another key
is pressed.
Press left or right to move the cursor within the chosen row
Press to switch between upper and lower case (in text input
mode).
Press 0 to enter a space.
Press Clear to correct a wrong entry.
In number input mode, if a pause is required in the number, it is
added by making a long press on . The pause is indicated with P in
the number. In number input mode, enter + for international calls by
pressing 0 twice.
© Copyright Aastra Telecom Sweden, 2009.
All rights reserved.
.
47