Startup; Loading - Meiko FV 130.2 Owner's Installation, Operation And Maintenance Manual

S 4 - O
ECTION PERATION

4.2 Startup

Check the level of the external detergent and
rinse additive dispensers. If necessary,
replace or refill the dispensers.
Press any of the three POWER/CYCLE
SELECT keys to turn on the machine.
Normal cycle for plates, glassware and
typically soiled pots, pans and utensils
Extended cycle for items with
greater soiling
Heavy cycle for very heavily soiled
items
The light above the selected
(flashing)
POWER/CYCLE SELECT key will
begin to flash, showing that the tank
is filling and the water is heating to
the correct temperature.
The time required for filling and preheating
will vary based on the temperature of the
incoming water supply. For incoming water
at 140°F/60°C, the machine may need up to
30 minutes to fill and heat to the correct wash
temperature. The default wash temperature
is several degrees above 150°F/66°C for
efficient operation.
O
PTIONAL
If desired, you can watch the WASH TANK
TEMPERATURE and FINAL RINSE TEM-
PERATURE displays as they rise. This gives
an indication of the amount of time left be-
fore the machine can be operated.
(constant) When the tank is full and the water
has been heated to the correct
temperature, the light above the
selected POWER/CYCLE SELECT
key will stop flashing. The machine
is now ready for operation.
Page 14

4.3 Loading

The loading guidelines shown here will lead
to faster, more efficient cleaning of your ware.
Load sheet pans, trays, etc. at an angle with
the inside face pointing up. Use the triangular
sheet pan support insert for these items for
faster loading, and to ensure that the ware is
positioned and spaced properly for effective
washing.
Load pots, bowls or deep pans with the open
side facing down.
Pans and trays
loaded at an angle
with the inside
facing UP
Sheet pan
support insert
Pots, bowls and
deep pans
loaded with the
open side facing
DOWN