Email Setup - OpenEye OE2-E48016 User Manual

EMAIL SETUP

The DVR can send an email notification to up to six defined email addresses when an event occurs.
SMTP / DVR SERVER – Select and set up the desired
e-mail server.
SEND EMAIL – Enable to send email notifications only
within a specified range of time.
OPTION – Press ENT to define the type of event that
will trigger an email notification.
CAMERA – Define the specific cameras on which an
event will trigger an email to that address.
RETRY – Set the number of times to retry the email
when it fails.
PIC – Enable to send a picture of the event.
EMAIL ADDRESS – Define the email address.
29081AD
E-MAIL OPTIONS
Select options to have an e-mail message sent:
MOTION – after a motion alarm is triggered.
SENSOR – after a sensor alarm is triggered.
VIDEO LOSS – after video loss on a camera
POWER – when the DVR is shutdown and restarted.
SETUP – when a user accesses Setup.
LOGIN FAIL – after one failed login attempt.
DISK FULL – when the HDD reaches the user-defined
maximum disk full percentage. See DISK MANAGEMENT –
OVERWRITE.
LOG IN – when a user successfully logs in..
SMART – when the HDD reaches the user-defined
maximum temperature. See DISK MANAGEMENT –
SMART.
37