Page 1
LOGGING IN FOR THE FIRST TIME User ID: admin Remote Software User ID: admin1 Password: <none> Password: <none> Note After logging in for the first time, change the admin password for the DVR and remote software to establish user level security. See the Manual for instructions. LED STATUS INDICATOR Power Illuminates when power is supplied to the DVR.
DIRECTIONAL AND PLAYBACK CONTROL BUTTONS Operation Modes: Live Mode, Live Freeze Mode, Search Mode, Search-Pause Mode, Navigation Mode, and PTZ Mode. Live Go to PTZ mode. Adjust zoom, focus, and iris on a PTZ channel. Search Start reverse playback of recordings. When pressed successively, the search jumps back in time by 30 minute increments.
Live Freeze live channels. Live Freeze Resume live view. Search Pause playback channels. Search Pause Resume playback. FUNCTION BUTTONS Search Open the search menu. Focus In PTZ mode, press to use the Focus function. Use the buttons to adjust. Backup In live mode, press to open the backup menu.
Page 4
HOW TO USE IR REMOTE CONTROLLER QUICK INSTALLATION When more than one E-Series DVR is installed in the same location, use one remote controller Connect cameras to video inputs, and if using, connect PTZ camera control lines to RS485 connector.
SET UP CONTINUOUS RECORDING SCREEN ICONS This icon always appears in conjunction with the Motion or Recording Continuous Recording icon. Motion Motion Recording Sensor Sensor (Alarm) Recording Continuous Continuous Recording Video Loss Video Loss Detected Freeze Pause Live View PTZ Camera Channel Channel Channel Number Channel Name...