Extron electronics PowerCage 1600 User Manual page 25

Modular power enclosure for fiber optic and twisted pair extenders

Hide thumbs Also See for PowerCage 1600:

Table of Contents

Audio output — PowerCage MTP R 15HD RSA SEQ

Number/signal type ........................ 1 mono, balanced/unbalanced

Connector ...................................... (1) 3.5 mm captive screw connector, 5 pole

Impedance ..................................... 50 ohms unbalanced, 100 ohms balanced

Gain error ...................................... ±1 dB channel to channel

Nominal levels ................................ +4 dBu (1.23 Vrms), -10 dBV (316 mVrms)

Maximum level ............................... +18 dBu, unbalanced at 1% THD+N

Audio — PowerCage MTP T AV, PowerCage MTP R AV

Number/signal type ........................ 1 set of proprietary analog signals

Connector ...................................... 1 female RJ-45

Gain ............................................... Unbalanced output: 0 dB; balanced output: +6 dB

Frequency response ........................ 20 Hz to 20 kHz, ±1 dB

THD + Noise ................................... 0.15% @ 1 kHz, 0.3% @ 20 kHz at nominal level

S/N ................................................. >70 dB at maximum output (unweighted)

Crosstalk ........................................ <-80 dB @ 1 kHz, fully loaded

Stereo channel separation .............. >60 dB @ 1 kHz

CMRR ............................................ >43 dB @ 20 Hz to 20 kHz

Audio input — PowerCage MTP T AV

Number/signal type ........................ 1 stereo, balanced/unbalanced

Connector ...................................... (1) 3.5 mm captive screw connector, 5 pole

Impedance ..................................... >10k ohms, unbalanced; >20k ohms, balanced; AC coupled

Nominal levels ................................ +4 dBu (1.23 Vrms), -10 dBV (316 mVrms)

Maximum level ............................... +18 dBu, (unbalanced) at 1% THD+N

NOTE: 0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ≈ 2 dBu

Audio output — PowerCage MTP R AV

Number/signal type ........................ 2 mono, balanced/unbalanced

Connector ...................................... (1) 3.5 mm captive screw connector, 5 pole

Impedance ..................................... 50 ohms unbalanced, 100 ohms balanced

Gain error ...................................... ±1 dB channel to channel

Nominal levels ................................ +4 dBu (1.23 Vrms), -10 dBV (316 mVrms)

Maximum level ............................... +18 dBu, unbalanced at 1% THD+N

PowerCage 1600 Enclosure • Specifications and Part Numbers

Table of Contents